MenuSearch | Country: Sweden | Currency: EUR
NF-A6x25 FLX 12V 3000RPM 60x25mm Low Noise Fan € 14.54
58 in stock
Add to Basket
(33 customer ratings)
More variations available Show

Noctua NF-A6x25 FLX 12V 3000RPM 60x25mm Low Noise Fan

Noctua’s first 60mm fan features Smooth Commutation Drive technology, modular cabling, Low-Noise Adaptors and a massive six years manufacturer’s warranty.

Features

  1. 60 x 25mm quiet PC cooling fan
  2. Noise level from 8.2 dB(A)
  3. Feature packed
  4. Six year manufacturer warranty

Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A6x25 FLX is a highly optimised, premium quality quiet fan in 60x25mm size. Smooth Commutation Drive technology and Noctua’s reference class SSO2 bearings guarantee superb running smoothness and excellent long-term stability. Topped off with modular cabling, Low-Noise Adaptors and six years manufacturer’s warranty, the NF-A6x25 is a premium choice for the highest demands.

Flow Acceleration Channels

The NF-A6x25 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. More info.

Reduced Motor Hub Size

Thanks to its streamlined, compact motor design, the NF-A6x25’s motor hub is smaller than with conventional 6cm fans. This allows for more blade surface area and thus contributes to the NF-A6x25’s superior airflow and pressure performance.

AAO Frame

Noctua’s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua’s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan’s performance/noise efficiency. More info.

Stepped Inlet Design

Noctua’s Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space restricted environments. More info.

Inner Surface Microstructures

With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. More info.

Integrated Anti-Vibration Pads

Integrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.

Smooth Commutation Drive 2

The latest version of Noctua’s advanced Smooth Commutation Drive system ensures superb running smoothness by eliminating torque variations and switching noises. This makes the NF-A6x25 remarkably quiet even at very close distance. More info.

SSO2 Bearing

The NF-A6x25 features the further optimised second generation of Noctua’s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. More info.

Three speed settings for full flexibility

Providing 3000, 2400 and 1600 RPM speed settings via the supplied Low-Noise and Ultra-Low-Noise Adapters, the NF-A6x25 FLX (Flexibility) can be fine-tuned for superior airflow or maximum quietness.

Extensive Cabling Options

The fan’s short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and the supplied 3:4 pin adaptor allows to connect the fan directly to the power supply.

Six years manufacturer’s warranty

Noctua fans are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the NF-A6x25 features an MTBF of more than 150.000 hours rating and comes with a full six years manufacturer’s warranty.

SpecificationsNF-A6x25 FLX
Size60x60x25 mm
Screw hole spacings50 mm
Connector3-pin
BearingSSO2
Blade GeometryA-Series with Flow Acceleration Channels
Frame TechnologyAAO (Advanced Acoustic Optimisation)
Rotational Speed (+/- 10%)3000 RPM
Rotational Speed with L.N.A. (+/- 10%)2400 RPM
Rotational Speed with U.L.N.A. (+/- 10%)1600 RPM
Airflow17.2 CFM
Airflow with L.N.A.13.8 CFM
Airflow with U.L.N.A.9.8 CFM
Acoustical Noise19.3 dB(A)
Acoustical Noise with L.N.A.14.5 dB(A)
Acoustical Noise with U.L.N.A.8.2 dB(A)
Static Pressure2.18 mm H2O
Static Pressure with L.N.A.1.41 mm H2O
Static Pressure with U.L.N.A.0.61 mm H2O
Max. Input Power1.44 W
Max. Input Current0.12 A
Voltage12 V
MTBF
150,000 h
AccessoriesLow-Noise Adaptor (L.N.A.), Ultra-Low-Noise Adapter (U.L.N.A.), 3 to 4-Pin Adaptor, 30cm Extension Cable, 3 Vibration-Compensators and 4 Fan Screws
Warranty72 months
EAN barcode4716123314707
SpecificationsNF-A6x25 FLX
Size60x60x25 mm
Screw hole spacings50 mm
Connector3-pin
BearingSSO2
Blade GeometryA-Series with Flow Acceleration Channels
Frame TechnologyAAO (Advanced Acoustic Optimisation)
Rotational Speed (+/- 10%)3000 RPM
Rotational Speed with L.N.A. (+/- 10%)2400 RPM
Rotational Speed with U.L.N.A. (+/- 10%)1600 RPM
Airflow17.2 CFM
Airflow with L.N.A.13.8 CFM
Airflow with U.L.N.A.9.8 CFM
Acoustical Noise19.3 dB(A)
Acoustical Noise with L.N.A.14.5 dB(A)
Acoustical Noise with U.L.N.A.8.2 dB(A)
Static Pressure2.18 mm H2O
Static Pressure with L.N.A.1.41 mm H2O
Static Pressure with U.L.N.A.0.61 mm H2O
Max. Input Power1.44 W
Max. Input Current0.12 A
Voltage12 V
MTBF
150,000 h
AccessoriesLow-Noise Adaptor (L.N.A.), Ultra-Low-Noise Adapter (U.L.N.A.), 3 to 4-Pin Adaptor, 30cm Extension Cable, 3 Vibration-Compensators and 4 Fan Screws
Warranty72 months
EAN barcode4716123314707

FAQ

  • How do I measure fan size?

    The size of fan you need will generally be determined by the size of the fan fitting position in your PC case. The sizes of all the fans on our website are shown as measured along any one of the fan’s four sides, NOT the distance between the fan’s screw holes! Our most popular fan size is 120mm, followed by 80mm. This isn’t really dictated by customer preference, but more by recent designs of PC cases.

    As for the thickness (depth) of the fan, generally 25mm (1 inch) is by far the most common depth, although smaller fans can have shallower depths such as 15mm or even 10mm. All our fans are 25mm thick unless otherwise stated. If you have any questions about which fan you should order, please don’t hesitate to get in touch.

    If you know the distance between the fan mounting screw holes but don’t know what fan size to order, please see the following table. Note that the mounting hole measurements shown below are taken horizontally or vertically between the holes and not diagonally.

    Screw hole spacings and fan sizes

    Space Between Screw Holes Fan Size
    32mm 40mm
    40mm 50mm
    50mm 60mm
    60mm 70mm
    72mm 80mm
    83mm 92mm
    105mm 120mm
  • I received a small cable (resistor) with my fan; what is it for?

    The resistor cable (also called Ultra Low Noise or ULN cable) is designed to allow the fan to run slightly slower for even quieter operation. The benefit in lower running noise is significant. Although the airflow will be reduced slightly, this usually has minimal effect on PC temperature. We would generally recommend using the ULN resistor cable for best results in almost all circumstances.

  • How can I tell which way the air blows through the fan?

    Hold the fan so that the round fan sticker is facing you. You are looking at the rear of the fan. When you plug the fan in, the air will be blowing towards you. If you want a fan to act as an air intake, then the fan sticker will be facing the inside of the case. Some fans also have two small arrows moulded into their plastic housing - one arrow shows the direction of airflow, and the other (at 90°) shows the direction of blade rotation.

  • Is it possible to use a 4-pin PWM fan or CPU cooler with a motherboard which has only 3-pin fan headers on it?

    Electrically, there is no problem doing this - the fourth pin on the fan cable is used purely for PWM control and is not needed in order for the fan to run. So you can plug the 4-pin fan connector onto the 3-pin motherboard fan header, leaving the fourth pin not connected to anything. The fan will potentially run at full speed, so if you would like to reduce the speed of the fan you will need to adjust the fan speed setting in your BIOS or use fan control software such as SpeedFan in Windows.

    The only other problem to consider is that occasionally, components immediately adjacent to the motherboard fan header can get in the way of the larger 4-pin fan connector, physically preventing connection. This problem also occurs if you try to use an in-line fan speed controller such as the one made by Gelid.

    Another avenue to explore is the possibility of using a bay-mounted fan controller. Several models are available now which provide 4-pin fan headers, so this is an easy way to use 4-pin PWM fans in a PC system which has only 3-pin fan headers on its motherboards. When using this method, you may find it necessary to disable any fan warning settings in your motherboard BIOS, since the motherboard may incorrectly believe that its CPU fan has failed when the fan is connected to a fan controller rather than directly to the motherboard itself.

Top Quiet Fans

Recently Viewed Products